跳至主要内容

GTM Automatic Laminating machine with pile turning device

GTM Automatic Laminating machine with pile turning device

Automatic Laminating machine Features introduction

Correction servo and bottom paper feeding servo all adopt Japanese Yaskawa servo drives, stable performance, high paper mounting precision and low energy consumption.

The touch screen has the functions of storing orders and one-key machine adjustment. Input the paper size, the machine is automatically adjusted in place, with zero error, convenient for starting, and improving production efficiency. The alarm display is clear and more intelligent.

The lamination of corrugated paper and cardboard adopts photoelectric to detect the relative position of the paper and control the servo motor to correct the deviation. The performance is stable, the servo tracking is high, the paper is high in precision and easy to maintain, and the real intelligent deviation correction is realized.

The toothed belt transmission, with high precision, low noise and continuous stability. All rollers are within 5g after dynamic balance correction, and the whole machine has high running stability. Adjusting the pressure of the whole machine greatly improves the speed of order changing, and the digital display of order changing pressure is more convenient and quick, and it can be adjusted directly in one step.

More information please click here

评论

此博客中的热门博文

C145E Automatic die-cutting and creasing machine with stripping station

C145E   Automatic die-cutting and creasing machine with stripping station Auto Die Cutting and Creasing Machine  Feature introduction Lead edge paper feeding unit 1.Uniquely designed lead edge feeding system adopt non-stop bottom suction leading edge feeding method, it overcomes the temperature, humidity and differences of paper weight cause by paper warp, make sure warp paper or thick paper feeding more smoothly. 2.The unique servo paper feeding system of this machine improves the precision of paper in place. Unique motion control program completely eliminates the phenomenon of paper scratching. 3.Install side pat baffle device, this device ensures that the paper stack position is basically correct when feeding paper. 4. The operator only need to input the length of paper, the paper wheel can completely send out the paper. Positioning and transport unit 1.High power servo drive for paper transfer and with a unique curve trajectory, to ensure that the paper in place and accura...

Problems in the Process of Carton Die-cutting

In the carton die-cutting process, we often encounter many problems, if these problems are not handled well, it will affect the carton printing, causing incalculable losses. Problems in the   carton die-cutting process   are as follows.                                                                               BMY1300  Semi automatic die-cutting and creasing machine   1. poor printing and cutting accuracy With the continuous improvement in the quality requirements of printed cartons, carton packaging design is becoming more and more complex. Complex carton template correspondingly increases the printing and  die-cutting accuracy requirements , in order to maintain the error range of ± 0.15mm, qualified die-cutting machine is essential, while paying attention to t...

The cause of paper broken after automatic die cutting

In recent years, with the packaging industry is difficult to recruit enough workers, many companies began to use a large number of automatic die-cutting machine. But often die-cutting section of friends reflect that the equipment will appear after a period of time the phenomenon of broken paper, what is the cause of it?   01 in the die-cutting knife knocked out or sawed out of the small mouth is not appropriate (1) small openings mainly in the direction of paper movement, left and right sides can not open or less open a little. (2) The small opening should be opened as far as possible in the finished box can be glued or folded in the inside of the part. (3) If there is a small incoherent hole in the paper, a small hole must be opened in the die-cutting knife in the direction of paper movement on the die-cutting plate, so that the waste paper in the small hole will not fall on the steel plate and be dragged into the creasing line, causing the product to break at the creasing part. (...