跳至主要内容

C145 Automatic die-cutting and creasing machine with stripping station

C145 Automatic die-cutting and creasing machine with stripping station


Product Features

C145 machine is a special equipment for die-cutting of high-end color boxes and color boxes, developed by our company in combination with the superior performance of similar products at home and abroad. This machine uses high-strength paper grippers. The advanced opening gripper mechanism can adapt to various types of cardboard and corrugated paper; the front and rear positioning and side positioning mechanisms ensure the accuracy of die-cutting paper. Equipped with high-precision intermittent mechanism; rapid-action pneumatic clutch and pneumatic lock plate. Using programmable controller and man-machine interface, digital display of the machine's working speed, number of processed sheets, and total running time; the machine's fault display makes troubleshooting operations very convenient. The inverter is used to control the main motor, stepless speed regulation, and stable operation. The machine is equipped with sensors and safety devices in many places to ensure the normal operation of the machine and personal safety. Die-cutting pressure can be adjusted separately before and after, manual turning is convenient and labor-saving, and die-cutting without gripping can be performed at the same time.

Lead edge feeding

1. The uniquely designed leading edge paper feeding technology device adopts the non-stop downward suction method, which overcomes the warping of the cardboard caused by the difference in the number of grams of paper in the surface of the temperature and humidity, and makes the paper feeding more smoothly.
2. The machine's unique servo paper feeding system improves the accuracy of paper placement, and the unique motion control program completely eliminates the phenomenon of drawing and scratching.
3. The side baffle device keeps the correct position of the paper stack when feeding the paper.
4. Only input the length of the paper when feeding the paper, and the paper wheel can completely send the paper out.

More information please visit: kingvida.com

评论

发表评论

此博客中的热门博文

C145E Automatic die-cutting and creasing machine with stripping station

C145E   Automatic die-cutting and creasing machine with stripping station Auto Die Cutting and Creasing Machine  Feature introduction Lead edge paper feeding unit 1.Uniquely designed lead edge feeding system adopt non-stop bottom suction leading edge feeding method, it overcomes the temperature, humidity and differences of paper weight cause by paper warp, make sure warp paper or thick paper feeding more smoothly. 2.The unique servo paper feeding system of this machine improves the precision of paper in place. Unique motion control program completely eliminates the phenomenon of paper scratching. 3.Install side pat baffle device, this device ensures that the paper stack position is basically correct when feeding paper. 4. The operator only need to input the length of paper, the paper wheel can completely send out the paper. Positioning and transport unit 1.High power servo drive for paper transfer and with a unique curve trajectory, to ensure that the paper in place and accura...
1 条评论
阅读全文

Problems in the Process of Carton Die-cutting

In the carton die-cutting process, we often encounter many problems, if these problems are not handled well, it will affect the carton printing, causing incalculable losses. Problems in the   carton die-cutting process   are as follows.                                                                               BMY1300  Semi automatic die-cutting and creasing machine   1. poor printing and cutting accuracy With the continuous improvement in the quality requirements of printed cartons, carton packaging design is becoming more and more complex. Complex carton template correspondingly increases the printing and  die-cutting accuracy requirements , in order to maintain the error range of ± 0.15mm, qualified die-cutting machine is essential, while paying attention to t...
发表评论
阅读全文

The cause of paper broken after automatic die cutting

In recent years, with the packaging industry is difficult to recruit enough workers, many companies began to use a large number of automatic die-cutting machine. But often die-cutting section of friends reflect that the equipment will appear after a period of time the phenomenon of broken paper, what is the cause of it?   01 in the die-cutting knife knocked out or sawed out of the small mouth is not appropriate (1) small openings mainly in the direction of paper movement, left and right sides can not open or less open a little. (2) The small opening should be opened as far as possible in the finished box can be glued or folded in the inside of the part. (3) If there is a small incoherent hole in the paper, a small hole must be opened in the die-cutting knife in the direction of paper movement on the die-cutting plate, so that the waste paper in the small hole will not fall on the steel plate and be dragged into the creasing line, causing the product to break at the creasing part. (...
发表评论
阅读全文