跳至主要内容

MY1300 Feida automatic die-cutting and creasing machine

MY1300 Feida automatic die-cutting and creasing machine

Product Features

Paper feeding department

The feeder adopts a large feeder head with four suctions and five feeds, which can smoothly convey thick paper. The transmission of the feeder head adopts Japanese Fuji high-precision servo and servo motion controller, Japanese Omron encoder tracking time is more accurate. The feeder can stop the action during manual feeding, reducing the wear of the feeder. The height of the feeder head and the adjustment of the size of the paper can be adjusted with one button, which saves labor and effort, and is convenient and time-saving. When the paper is too warped, you can manually feed the paper. The feeder can be adjusted to the end with one key. Multiple control panels provide you with more convenience . The combination of paper feeding frame and cylinder can easily solve problems. Imported paper conveyor belt has high friction, high wear resistance and longer use. The paper feeder adopts a special feeder with four suction and five feed to ensure the smooth conveyance of various papers. The power is large and the time is accurate. Advanced push-pull integrated gauge, easy to adjust. With fine adjustment, the small distance can be easily handled without stopping the machine. Push-pull gauge interchange conveniently and quickly.

This Feeder Feeding Automatic Die-cutting Machine is newly designed by our company based on the bending and warping of the paper, combined with our company's years of production experience in semi-automatic die-cutting machines and full-automatic die-cutting machines, and combined with the questions raised by a large number of customers. Wide suitable for more customers. 

评论

发表评论

此博客中的热门博文

C145E Automatic die-cutting and creasing machine with stripping station

C145E   Automatic die-cutting and creasing machine with stripping station Auto Die Cutting and Creasing Machine  Feature introduction Lead edge paper feeding unit 1.Uniquely designed lead edge feeding system adopt non-stop bottom suction leading edge feeding method, it overcomes the temperature, humidity and differences of paper weight cause by paper warp, make sure warp paper or thick paper feeding more smoothly. 2.The unique servo paper feeding system of this machine improves the precision of paper in place. Unique motion control program completely eliminates the phenomenon of paper scratching. 3.Install side pat baffle device, this device ensures that the paper stack position is basically correct when feeding paper. 4. The operator only need to input the length of paper, the paper wheel can completely send out the paper. Positioning and transport unit 1.High power servo drive for paper transfer and with a unique curve trajectory, to ensure that the paper in place and accura...
1 条评论
阅读全文

Problems in the Process of Carton Die-cutting

In the carton die-cutting process, we often encounter many problems, if these problems are not handled well, it will affect the carton printing, causing incalculable losses. Problems in the   carton die-cutting process   are as follows.                                                                               BMY1300  Semi automatic die-cutting and creasing machine   1. poor printing and cutting accuracy With the continuous improvement in the quality requirements of printed cartons, carton packaging design is becoming more and more complex. Complex carton template correspondingly increases the printing and  die-cutting accuracy requirements , in order to maintain the error range of ± 0.15mm, qualified die-cutting machine is essential, while paying attention to t...
发表评论
阅读全文

The cause of paper broken after automatic die cutting

In recent years, with the packaging industry is difficult to recruit enough workers, many companies began to use a large number of automatic die-cutting machine. But often die-cutting section of friends reflect that the equipment will appear after a period of time the phenomenon of broken paper, what is the cause of it?   01 in the die-cutting knife knocked out or sawed out of the small mouth is not appropriate (1) small openings mainly in the direction of paper movement, left and right sides can not open or less open a little. (2) The small opening should be opened as far as possible in the finished box can be glued or folded in the inside of the part. (3) If there is a small incoherent hole in the paper, a small hole must be opened in the die-cutting knife in the direction of paper movement on the die-cutting plate, so that the waste paper in the small hole will not fall on the steel plate and be dragged into the creasing line, causing the product to break at the creasing part. (...
发表评论
阅读全文