跳至主要内容

Matters needing attention when using die cutting machine products

 Precautions for stamping products of die cutting machine:

 

　　 1. Lubricate the operating parts of the machine before use or within a working period of time (please add 0# special butter);
 
　　2. Do not enter the die-cutting area with your hands or other parts of your body during use, please use infrared protection devices;
 
　　3. Please install and debug the mold when the power supply is cut off;
 
　　4. The large stamping load of machine stamping products is not allowed to exceed the nominal pressure of the machine. Long-term load work will reduce the life of the machine and damage the body;
 
　　5. Work or debug step by step, do not jam the board, such as the board, please stop it immediately, and use it after troubleshooting;
 
　　6. Please operate according to the precautions in the instructional CD for the operation of our die-cutting machine.
        

评论

发表评论

此博客中的热门博文

C145E Automatic die-cutting and creasing machine with stripping station

C145E   Automatic die-cutting and creasing machine with stripping station Auto Die Cutting and Creasing Machine  Feature introduction Lead edge paper feeding unit 1.Uniquely designed lead edge feeding system adopt non-stop bottom suction leading edge feeding method, it overcomes the temperature, humidity and differences of paper weight cause by paper warp, make sure warp paper or thick paper feeding more smoothly. 2.The unique servo paper feeding system of this machine improves the precision of paper in place. Unique motion control program completely eliminates the phenomenon of paper scratching. 3.Install side pat baffle device, this device ensures that the paper stack position is basically correct when feeding paper. 4. The operator only need to input the length of paper, the paper wheel can completely send out the paper. Positioning and transport unit 1.High power servo drive for paper transfer and with a unique curve trajectory, to ensure that the paper in place and accura...
1 条评论
阅读全文

Problems in the Process of Carton Die-cutting

In the carton die-cutting process, we often encounter many problems, if these problems are not handled well, it will affect the carton printing, causing incalculable losses. Problems in the   carton die-cutting process   are as follows.                                                                               BMY1300  Semi automatic die-cutting and creasing machine   1. poor printing and cutting accuracy With the continuous improvement in the quality requirements of printed cartons, carton packaging design is becoming more and more complex. Complex carton template correspondingly increases the printing and  die-cutting accuracy requirements , in order to maintain the error range of ± 0.15mm, qualified die-cutting machine is essential, while paying attention to t...
发表评论
阅读全文

The cause of paper broken after automatic die cutting

In recent years, with the packaging industry is difficult to recruit enough workers, many companies began to use a large number of automatic die-cutting machine. But often die-cutting section of friends reflect that the equipment will appear after a period of time the phenomenon of broken paper, what is the cause of it?   01 in the die-cutting knife knocked out or sawed out of the small mouth is not appropriate (1) small openings mainly in the direction of paper movement, left and right sides can not open or less open a little. (2) The small opening should be opened as far as possible in the finished box can be glued or folded in the inside of the part. (3) If there is a small incoherent hole in the paper, a small hole must be opened in the die-cutting knife in the direction of paper movement on the die-cutting plate, so that the waste paper in the small hole will not fall on the steel plate and be dragged into the creasing line, causing the product to break at the creasing part. (...
发表评论
阅读全文